BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Engine Query Empty Engine Query Sat Sep 07, 2013 6:27 am

hopping mad

hopping mad
active member
active member
Hello Everyone,

Following on from my previous posts regarding the total strip down and renovation of my K100

I am now starting to fit new seals to the engine, gearbox and final drive.

I have a set of K1100 throttle bodies with the potentiometer fitted to them and wondered if it was possible to fit them and just connect the wires. I understand that the airflow meter flap spindle operates the potentiometer and that both have the same amount of wires.

Has anyone already completed this modification - if yes, have you noticed any significant changes.

Or is this not possible?

Any advice, guidance, hints or tips would be very much appreciated.

Regards


Hopping Mad

    

2Back to top Go down   Engine Query Empty Re: Engine Query Sat Sep 07, 2013 7:31 am

charlie99

charlie99
VIP
VIP
k1100 tbs do fit ...but the tps switch is very different between the models and their function

someone has changed the last butterfly rod so that the old k 100 adaptor-interface lines up with the k100 tps (sorry forgot exactly who .....ringfad ?) 
from memory the k1100 is a half moon ...but the k100 is a tongue- slot  type fit into the tps switch
yes a good improvement from a couple of sources
you will have to plug the rear vacuume lines on the k1100 tbs ...that are different to the k100  as well .

hope that helps

 good luck !


__________________________________________________
cheezy grin whilst riding, kinda bloke ....oh the joy !!!! ...... ( brick aviator )

'86 K100 RT..#0090401 ..."Gerty" ( Gertrude Von Clickandshift ) --------O%O
'86 k100 rs.. #######..  "Fred " (f(rame) red ) ( Fredrick leichtundschnell ) - -
bits and pieces from many kind friends across the k100 world ...with many thanks ..
1987 k100rs ########   "Red"  - (red sports rs TWB style )
1989 K100rt #009637   "Black Betty"  (naked rt ala Nigel , now sporting an rs main fairing )
    

3Back to top Go down   Engine Query Empty Re: Engine Query Sat Sep 07, 2013 4:14 pm

hopping mad

hopping mad
active member
active member
Hi Charlie 99,

Thanks for the info ~ all information and guidance is greatly appreciated.

Once I have mastered loading pictures, will upload some to show how I'm getting along with the renovation.

Regards


Hopping Mad

    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum