BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Steering head bearing parts Empty Steering head bearing parts Mon Sep 15, 2014 4:52 pm

BooG

BooG
Platinum member
Platinum member
Just checking the spec for the bearings on a '88 K75....320/28 X/Q   SKF
Will I need a steering head bearing metal cap as well?

    

2Back to top Go down   Steering head bearing parts Empty Re: Steering head bearing parts Tue Sep 16, 2014 6:23 am

mike d

avatar
Life time member
Life time member
If you are talking about the metal dust cap that sits on the bottom yoke under the lower taper roller bearing, then yes, as you are likely to destroy it when removing the old bearing. They don't cost much.

Mike

    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum