BMW K bikes (Bricks)


You are not connected. Please login or register

K100-forum.com » Technical, repair and troubleshooting » Engine and transmission » Fuel injector reinstalling

View previous topic View next topic Go down  Message [Page 1 of 1]

1Back to top Go down   Fuel injector reinstalling Empty Fuel injector reinstalling Mon Sep 04, 2017 9:01 am

renriv

renriv
active member
active member
have had the injectors out on a K100RT - after much grunting and cursing !- but they don't seem to be going in far enough when i put them back. If I screw the fuel rail down tight does this seat the injectors properly. It seems to me they are still leaking slightly. Do I then have to adjust the bypass screws separately to get the bike idling smoothly ?

    

2Back to top Go down   Fuel injector reinstalling Empty Re: Fuel injector reinstalling Mon Sep 04, 2017 9:51 am

Rick G

Rick G
admin
admin
Use some Vaseline on the O-rings and put all 4 into the rail, put the clips on then put them into the head. You should feel a very positive seating of them then put the screws in to hold them in place.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

3Back to top Go down   Fuel injector reinstalling Empty Re: Fuel injector reinstalling Mon Sep 04, 2017 10:18 am

duck

duck
Life time member
Life time member
I just put motor oil on the O-rings.

Install them on the fuel rail first.

Line them up and tap the fuel rail with a rubber mallet to seat them.  

If you don't have a rubber mallet handy then use a small block of wood and a hammer.


__________________________________________________
Current stable:
86 Custom K100 (standard fairing, K75 Belly pan, Ceramic chromed engine covers, paralever)
K75 Frankenbrick (Paralever, K11 front end, hybrid ABS, K1100RS fairing, radial tires)
86 K75C Turbo w/ paralever
94 K1100RS
93 K1100LT
91 K1
93 K75S (K11 front end)
91 K75S (K1 front end)
14 Yamaha WR250R
98 Taxi Cab K1200RS
14 K1600GT
http://www.ClassicKBikes.com
    

4Back to top Go down   Fuel injector reinstalling Empty fuel injector reinstalling Tue Sep 05, 2017 12:01 am

renriv

renriv
active member
active member
OK Thanks. That's basically what i've done so i'll try giving the rail another hit !!

    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

K100-forum.com » Technical, repair and troubleshooting » Engine and transmission » Fuel injector reinstalling

Permissions in this forum:
You cannot reply to topics in this forum