charlie99
VIP
Number of posts : 11688
that connector is almost the same as the clutch , rear brake switch front brake switch as it leaves the main loom the mate for it is on the end of the cable coming from the switches , I believe its a 2.1 mm pin plug required to fit that socket , but I haven't seen many available at all ..exactly the same
inside the rear cowl stop light lens assembly you will see small spade type connectors connecting to each of the globe holders .
I would break into the cables before reaching the globe assembly
there is a hole in the rear cowl upper right hand side ...which lets the cabling loom to gain access to the rear lens , you could drop a cable out through that hole , so its on the under side of the rear cowl ...easily allowing access to that connector there ...I guess. as its a routine part of changing tyres , to remove that rear flap- guard from the bike to let the wheel come out the back whilst on the centre stand.
possible a cable p clamp could hold that cable in place so it doesn't bind - collect the rear wheel whilst moving ???
hope that helps
__________________________________________________
cheezy grin whilst riding, kinda bloke ....oh the joy !!!! ...... ( brick aviator )
'86 K100 RT..#0090401 ..."Gerty" ( Gertrude Von Clickandshift ) --------O%O
'86 k100 rs.. #######.. "Fred " (f(rame) red ) ( Fredrick leichtundschnell ) - -
bits and pieces from many kind friends across the k100 world ...with many thanks ..
1987 k100rs ######## "Red" - (red sports rs TWB style )
1989 K100rt #009637 "Black Betty" (naked rt ala Nigel , now sporting an rs main fairing )
K100 or k1100 fog light Wed Aug 29, 2018 5:41 pm
