BMW K bikes (Bricks)


You are not connected. Please login or register

K100-forum.com » Technical, repair and troubleshooting » Engine and transmission » Clutch dismantling

View previous topic View next topic Go down  Message [Page 1 of 1]

1Back to top Go down   Clutch dismantling Empty Clutch dismantling Fri Mar 12, 2010 10:22 am

japuentes

japuentes
Life time member
Life time member
Hello there.
Any experience in removing the clutch cover plate?, mine is stuck and I´ll appreciate your kind help.
Best regards
JAP

1988 K100 rs ABS

    

2Back to top Go down   Clutch dismantling Empty Re: Clutch dismantling Fri Mar 12, 2010 10:38 am

Crazy Frog

Crazy Frog
admin
admin
Common problem!

Use a big screw driver as a pry bar. Be careful not to scratch the plate.

Clutch dismantling 25


__________________________________________________
Clutch dismantling Frog15Clutch dismantling Logo2101986 k75, 1985 K100rt, 1985 K100rt/EML GT2 sidecar, 1999 K1200lt/Hannigan Astro Sport sidecar.
    

3Back to top Go down   Clutch dismantling Empty Re: Clutch dismantling Fri Mar 12, 2010 12:31 pm

japuentes

japuentes
Life time member
Life time member
I´ll keep trying
Thanks for your kind answer
Best regards
JAP

    

4Back to top Go down   Clutch dismantling Empty Re: Clutch dismantling Fri Mar 12, 2010 5:11 pm

club_c

club_c
Life time member
Life time member
Yep, just in there last week, same issue, same solution, prying it off.

    

5Back to top Go down   Clutch dismantling Empty Re: Clutch dismantling Sat Mar 13, 2010 11:46 am

japuentes

japuentes
Life time member
Life time member
Good morning, its done thanks for your kind help, now there is another question regarding the seal instalation so Ill open a new topic for that one.
Best regards
JAP

    

6Back to top Go down   Clutch dismantling Empty Re: Clutch dismantling Sat Mar 13, 2010 4:24 pm

K-BIKE

avatar
Life time member
Life time member
Well done JAP in getting yours off. It just goes to show what the communal mind can do in reassuring one when we are doing something for the first time, there is always someone who has done it many times before and knows the tricks.
Regards,
K-BIKE

    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

K100-forum.com » Technical, repair and troubleshooting » Engine and transmission » Clutch dismantling

Permissions in this forum:
You cannot reply to topics in this forum