BMW K bikes (Bricks)


You are not connected. Please login or register

K100-forum.com » Technical, repair and troubleshooting » Other K bricks (K75, K1100, K1) General discussion. » Banjo Bolt Size?

View previous topic View next topic Go down  Message [Page 1 of 1]

1Back to top Go down   Banjo Bolt Size? Empty Banjo Bolt Size? Sat Mar 07, 2015 1:24 am

Oliveri

Oliveri
Silver member
Silver member
I'm looking for a front brake master cylinder (13mm, no ABS) banjo bolt for my ’88 K100RT. I finally got a new master cylinder, but unfortunately have no hollow banjo bolt. The old one was mangled. 

What is the correct size & where can i get one?


__________________________________________________
"Keep the paint up, and the rubber down

1988 K100RT...#0096960 ..."Heisenberg"...Status: Work in progress
http://www.oliveris.com.au
    

2Back to top Go down   Banjo Bolt Size? Empty Re: Banjo Bolt Size? Sat Mar 07, 2015 3:14 am

Rick G

Rick G
admin
admin
Any brake place should have one or two, 10mm Banjo bolt. Take the mangled one with you.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

3Back to top Go down   Banjo Bolt Size? Empty Re: Banjo Bolt Size? Sat Mar 07, 2015 7:51 am

Oliveri

Oliveri
Silver member
Silver member
Thanks, any idea on the lengh of the bolt? The original is no longer available to me.


__________________________________________________
"Keep the paint up, and the rubber down

1988 K100RT...#0096960 ..."Heisenberg"...Status: Work in progress
http://www.oliveris.com.au
    

4Back to top Go down   Banjo Bolt Size? Empty Re: Banjo Bolt Size? Sat Mar 07, 2015 8:52 am

Inge K.

Inge K.
VIP
VIP
RicK G wrote: Take the mangled one with you.
Oliveri wrote:The original is no longer available to me.

The one on the other end of the hose is identical.

Banjo Bolt Size? Banjob10


__________________________________________________
Inge K.
K100RS -86. (first owner), K1100LTSE -94.
    

5Back to top Go down   Banjo Bolt Size? Empty Re: Banjo Bolt Size? Sat Mar 07, 2015 5:25 pm

sidecar paul

sidecar paul
Life time member
Life time member
10 mm x 1 mm pitch

Be careful as banjo bolts also come with 1.5 mm pitch.

Paul.


__________________________________________________
'84 K100RS (0014643) (owned since '85), 86 K100RS (0018891) with Martello sidecar (built as an outfit in '88),
'51 Vincent (since '67),'72 Montesa Cota (from new), '87 Honda RS125R NF4 (bought 2015) 
....No CARS never ever!
    

6Back to top Go down   Banjo Bolt Size? Empty Re: Banjo Bolt Size? Sat Mar 07, 2015 8:44 pm

Dai

Dai
Life time member
Life time member
Beat me to it Paul. IME most Japanese, Italian and German bikes come with 1mm pitch (Metric Fine). Kawasaki, for reasons best known to themselves, used Metric Standard (1.5mm). In these days of buying most things from one supplier's standard range I think even Kawasaki use Metric Fine now.

The other piece of advice I'd offer is forget MotoWhoever and buy stainless from ebay.


__________________________________________________
1983 K100 naked upgraded to K100LT spec after spending time as an RS and an RT
1987 K100RT
Others...
1978 Moto Guzzi 850-T3, 1979 Moto Guzzi 850-T3 California,1993 Moto Guzzi 1100ie California
2020 Royal Enfield Bullet 500
    

7Back to top Go down   Banjo Bolt Size? Empty Re: Banjo Bolt Size? Sat Mar 07, 2015 11:16 pm

Oliveri

Oliveri
Silver member
Silver member
Thanks everyone. Stainless, 1mm pitch, 10mm thread & 25mm long. 

Perfect....


__________________________________________________
"Keep the paint up, and the rubber down

1988 K100RT...#0096960 ..."Heisenberg"...Status: Work in progress
http://www.oliveris.com.au
    

8Back to top Go down   Banjo Bolt Size? Empty Re: Banjo Bolt Size? Sat Mar 07, 2015 11:23 pm

Rick G

Rick G
admin
admin
20mm you don't count the head on a hex head bolt only on a countersunk head.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

9Back to top Go down   Banjo Bolt Size? Empty Re: Banjo Bolt Size? Sun Mar 08, 2015 5:59 am

Oliveri

Oliveri
Silver member
Silver member
....ops, yes of course. Thanks again.


__________________________________________________
"Keep the paint up, and the rubber down

1988 K100RT...#0096960 ..."Heisenberg"...Status: Work in progress
http://www.oliveris.com.au
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

K100-forum.com » Technical, repair and troubleshooting » Other K bricks (K75, K1100, K1) General discussion. » Banjo Bolt Size?

Permissions in this forum:
You cannot reply to topics in this forum